Cartes interfaces RS485
The REM-485-T1 is an optional module for CM-80 control panels. It provides 4 SPST relays rated 3 A/30 VDC and 8 monitored outputs rated 1 A/24 VDC. It is also available in an ABS enclosure (240 x 191 x 107 mm) under the reference REM-485-T1-B. It connects to the control panel over an RS485 Modbus RTU serial link (or CAN bus). The status of the board is indicated by LEDs (power present, status of the 4 relays, status of the 8 monitored outputs, Tx/Rx communication channels). Connections are made on pluggable terminals.
Applications
Water treatment
Industries agroalimentaires
Industries chimiques
Industries automobiles
Raffineries
The REM-485-T1 is an optional module for CM-80 control panels. It provides 4 SPST relays rated 3 A/30 VDC and 8 monitored outputs rated 1 A/24 VDC. It is also available in an ABS enclosure (240 x 191 x 107 mm) under the reference REM-485-T1-B. It connects to the control panel over an RS485 Modbus RTU serial link (or CAN bus). The status of the board is indicated by LEDs (power present, status of the 4 relays, status of the 8 monitored outputs, Tx/Rx communication channels). Connections are made on pluggable terminals.
| Mechanical | |
Dimensions (L x H x P) |
Carte seule : 178 x 77 x 34,6 mm |
Poids (hors boîtier) |
400 g |
Couleur |
Boîtier : Gris RAL 7035 |
Matériau |
ABS |
Fixation |
Wall mounting using the 4 screws supplied |
| Electrical | |
Tension d’alimentation |
Nominal 24 VCC (10 à 32 VCC) |
Consommation veille / alarme |
20 mA / 75 mA |
Protection électrique |
Fusible 1 A |
Sorties relais |
4 relais SPTS 3A/30 VCC |
Sorties surveillées |
8 sorties 1A/24 VCC |
| Environnementales | |
Protection rating |
Boîtier : IP65 |
Température en fonctionnement / stockage |
-40°C to +85°C / -20°C to +70°C |
Humidité en fonctionnement / stockage |
≤ 90% HR / ≤ 90% HR |
Gamme CM-80 |
CENTRALES FEU & GAZ |
CM-80T5N-B, CM-80T5N-B24, CM-80T5N |
Note : |
The RJ45 cable, part number RAM-485-CCRJ50, is supplied with the enclosure version but must be ordered separately when the board is used on its own. |
Interconnection board for open collector or open emitter outputs REM-D15
Coffret en acier peint (400 x 600 x 250 mm)
2 modules REM-485 max.
BOX4060ETA
Coffret en acier peint (600 x 800 x 300 mm)
6 modules REM-485 max.
BOX6080ETA
RJ45 cable for REM-485 modules
RAM-485-CCRJ50
ABS enclosure for REM-485-T1 board
REM-485-T1D15-B
